东莞制鞋机CE认证属于机械

制鞋机械欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 931:1997+A2:2009 Footwear manufacturing machines - Lasting machines - Safety requirements制鞋机械.耐久机械.安全要求

EN 931:1997+A2:2009适用范围：

1.1 This standard is applicable to lasting machines used in the footwear manufacturing industry, namely: Adhesive fore part lasting machines (see figure 1), Hand operated adhesive side lasting machines (see figure 3 A), Adhesive seat lasting machines (see figure 2), Adhesive seat and side lasting machines (see figure 2), Hand operated tack/staple side lasting machines (see figure 3B), Tack seat lasting machines (see figure 2), Tack seat and side thermocement lasting machines (see figure 2), Tack heel seat and thermocent side lasting machines (see figure 2), Tack heel seat and thermocent + tack side lasting machines (see figure 2).

1.2 This standard does not apply to lasting machines which process granular thermocement.

1.3 This standard specifies requirements for safe design, construction and use of the machines. No specific requirements are included for transport, commissioning and decommissioning. It takes account of intended use, foreseeable misuse, component and system failure.

1.4 This standard covers all hazards relevant to the footwear manufacturing industry. The use of machines within the scope of this standard in different industries may give rise to hazards which were not taken into account at the time of its preparation.

1.5 This document is not applicable to lasting machines which are manufactured before the date of its publication as EN.

1.1本标准适用于鞋类制造业中使用的定型机，即：粘合前部定型机（见图1）、手动粘合侧定型机（见图3 A）、粘合座定型机（见图2）、粘合座和侧定型机（见图2）、手动钉/钉侧定型机（见图3B），钉座持久机（见图2）、钉座和侧面热水泥持久机（见图2）、钉跟座和热水泥侧面持久机（见图2）、钉跟座和热水泥+热水泥侧面持久机（见图2）。

1.2本标准不适用于加工粒状热水泥的持久机。

1.3本标准规定了机器的安全设计、施工和使用要求。不包括运输、调试和停运的具体要求。它考虑了预期用途、可预见的误用、组件和系统故障。

1.4本标准涵盖与鞋类制造业相关的所有危险。在不同行业中使用本标准范围内的机器可能会产生危险，在编制本标准时未考虑这些危险。

1.5本文件不适用于在EN发布日期之前制造的耐久机。